OPTIMIZATION OF INJECTION MOLDING QUALITY BASED ON BP NEURAL NETWORK AND PSO

Authors

  • Feng Lin Fuzhou Polytechnic, College of Mechanical and Electronic Engineering, Fuzhou, China
  • Jingying Duan Shandong Labor Vocational and Technology College, Jinan, China
  • Qiuxia Lu Shandong Labor Vocational and Technology College, Jinan, China
  • Xibing Li Fujian Agriculture and Forestry University, College of Mechanical and Electronic Engineering, Fuzhou, China

DOI:

https://doi.org/10.17222/mit.2022.516

Keywords:

orthogonal test, entropy weight, neural network, particle swarm optimization

Abstract

An electronic product shell is prone to uneven shrinkage, warpage and sink marks, resulting in a large number of unqualified products and increased costs. Therefore, volumetric shrinkage, warpage deformation and sink mark index are selected as optimization goals. Based on the orthogonal test and entropy weight method, a multi-objective optimization was transformed into a comprehensive evaluation optimization. A BP neural network combined with a particle swarm optimization algorithm was used to obtain the optimal combination of process parameters, simulated by Moldflow to reduce volumetric shrinkage to 3.46 %, warpage deformation to 2.538 mm, and the sink mark index to 1.87 % so as to improve the injection molding quality of the plastic parts and meet the requirements of qualified parts. The combination of the BP neural network and particle swarm optimization algorithm can prevent the defects such as large shrinkage, warpage and sink marks

Downloads

Published

2022-10-04

How to Cite

1.
Lin F, Duan J, Lu Q, Li X. OPTIMIZATION OF INJECTION MOLDING QUALITY BASED ON BP NEURAL NETWORK AND PSO. MatTech [Internet]. 2022 Oct. 4 [cited 2026 Nov. 15];56(5):491–497. Available from: https://www.mater-tehnol.si/index.php/MatTech/article/view/516